- Same as #69 but contains anti-static agent which helps to reduce dust and particle attraction to molds due to buildup of static charge.
- Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean molds and relieve the problems of wax build-up & over-spray from mold surfaces.
- Important mold release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the molds.
- Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper molds and parts.
- Please note #69AS does not relieve Styrene burns.
-
-
- Same usage as #135-80, but #80 is milder and contains no toluene or polymers.
- Specially formulated for cleaning Elastomer Resins (ER).
- Contains special surfactants that do not react with the resin that other cleaners might.
-
A polymer-based release agent which has high heat stability. It’s polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions. It is specially designed for:
- Accelerated Exothermic Resins up to 400º F or 204º C
- Multiple Releases
- Compression Molding
- Vacuum Bagging
- Resin Transfer Molding (RTM)
-
It is recommended for the following types of urethane moldings:
- Elastomer Urethane
- Polyisocynate Component A
- Hydro-Resin Component B
- Urethane Foam
- Isocynate Component A (Diphenylmethone)
- Poly Component B (Polypreponal Glycol)
-
- Similar in hardness to #1000P. It is yellow in color and has a peculiar, turpentine smell.
- Comparable to Meguiar’s #8. Our extensive testing shows that you get equivalent or better release with #888 than with comparable Meguiar’s product.
- Good for up to 230º F or 120º C.
- This is one of our newer products and sample requests welcome.
-
- Heavy-duty (HD) cousin of FK’s #332: Hand or Spray Interphase Release Wax. Contains the same high-melt synthetic blend waxes incorporated into #1000P: Hi-Low Paste Wax and #1000L: Hi-Low Liquid Wax but the solvent systems have been changed to reduce viscosity and make the product sprayable.
- Field tested and fully embraced by all users because it gets the job done – especially for larger molds, panels and other large jobs that require excessive labor for application of paste or liquid waxes.
- Very easy application – just spray on, allow it to dry and then wipe lightly – quick and easy. Cuts your labor costs and increases your productivity.
-
- FK’s premium cleaner that incorporates glazing and spreading agents.
- Cleans deeper without any heavy abrasive action.
- Easily relieves buffer swirls, paint and gel burns; Smoothens and removes fine scratches and blemishes.
- Assures a deeper and cleaner finish on molds for sharp looking parts.
- Recommended for rubbing out slight imperfections in the mold or finished parts and for removal of oxidation and/or discoloration of older parts. It is comparable to Meguire #1 Compound.
-
- Specially formulated for removal of wet or dry sanding marks, imperfections and other mild defects without scouring the gel coat.
- A fast cutting compound formulated with fine abrasives and silicates to remove fine to medium scratches and blemishes.
- Can be used on all gel coated surfaces as well as other mold materials.
-
- Fast cutting compound that can be applied by hand or machine.
- Recommended for rubbing out fine mold imperfections and fine or minor scratches.
- Removes and blends or does touch up of mold surfaces when removal of foreign matter is essential.
- Can also be used in heavy-duty work.
-
- A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
- Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
- Can be applied to all painted or gel coat surfaces.
-
- Made with a heavy wax base.
- Fine polishing compound used for the final machine polishing and dressing of molds before sealing and waxing.
- Improves clarity and luster.
- Excellent for older parts where light buffing may be required.
-
- Formulated specifically for FRP and cultured marble industries where a flange- or edge-wax is required to assist in the prompt and easy release of the part.
- Edge Wax is a semi-paste and it incorporates synthetic waxes into a system that forms a film that is virtually unbendable when applied as follows.