- Specially designed to reduce the slip factor, which under some situations might allude to pre-release.
- In the event “pre-release” occurs on corners, wells and radiuses due to excessive exothermic heat generated by mass chopping over these areas due to repeated passes, apply #1006 as the last coat or last two coats over the application of #1000P prior to gel coat and lay up.
-
-
Finish Kare’s 2685 Cherry Pink Paste Wax is a special blend of wax and polymer resins. This delightfully scented, buttery soft wax is easy to apply. It is equally as effortless to wipe off and produces a deep glossy protective film that lasts for 3-6 months. It is safe to use for all Automotive, Marine, Motorcycle and Aircraft finishes.
-
- As the name implies, designed to withstand higher temperatures and is harder than other waxes.
- Good for up to 275º F or 135º C.
- USAGE: Higher temperature exothermic reactions.
-
- True high-gloss paste wax.
- Withstands high-temperature exothermic reactions of resins and does multiple releases easily.
- Contains carnauba wax, synthetic waxes and high-temperature resistant resins for effective multiple releases of plastic parts through numerous cycles.
- Good for up to 230º F or 110º C.
- Buttery texture provides easy on/off applications.
- Sets up faster and harder and assures quick, clean releases without wax buildup or transfer.
- Recommended for the effective release of any FRP or cultured marble parts, polyesters, polyurethane, etc....
-
BWM 114 is a fast cutting compound for all fiberglass, chrome, and paint, buffered for effective cleaning without heavy scratching. It is STEP 1 of 3 in our BIG WHITE PASTE WAX SYSTEM. Apply to all fiberglass, chrome and painted surfaces to remove oxidation, rust or stains. Follow with an application of BWM # 164 Sealant Conditioner for smoothing and color brightening. Then BWM for the ultimate in surface protection, apply BWM # 101 Hi-Temp Paste Wax. DIRECTIONS: Apply compound with soft toweling. Work thoroughly into the surface to be cleaned and waxed. Use circular motion. Overlap previous area for uniformity, wipe off residue with soft cloth or toweling. Turn to clean side. Buff to a bright slick surface. Machine Operation: Power Buff. Dab material with the brush and apply on to the area to be buffed. Spread evenly, maintaining a light even pressure. Continue to buff, overlapping previous area for uniformity. Finish buff to dry lustrous finish.
-
- Contains a blend of synthetic waxes and is one of FK’s premium mold release waxes.
- Proper application of this wax will result in a film that has high gloss and has resistance to intensive wear, heat and water.
- Good for up to 275º F or 135º C.
-
BWM-164 is designed for all fiberglass, chrome & painted surfaces. It brings back dull surfaces to new or near new condition. It is a polish & conditioner in one, so it cleans, protects and restores in one easy step. If there is excessive oxidation, a second application may be necessary. California VOC compliant. DIRECTIONS: It can be applied by hand or machine. For hand use, apply # 164 with a soft towel by working it thoroughly into the surface. Use overlapping circular motion for uniform coverage. Allow it to dry to a haze and wipe off residue with a soft cloth, turn to a clean side of a towel & buff to a glossy smooth surface. When using a buffer maintain a light even pressure and buff in overlapping areas for uniformity. Then, allow it to dry completely and wipe with a clean soft cloth or towel to a glossy surface.
-
FINAL STEP OF 3 STEP BIG WHITE PASTE WAX SYSTEM FK’s # BWM 101 is made from a blend of synthetic waxes to obtain a high degree of consistent quality. The most important attributes of this wax blend are hi melting points and greater hardness than natural waxes. The resulting film provides not only the high gloss but resistance to wear from heat, water & other natural causes. California VOC compliant. It is easy to use and easy to wipe off. It is fantastic for the following Marine, Aircraft & Automotive finishes:
- Clear Coats
- Gel Coats
- Painted Surfaces
- Chrom
- Stainless Steel
- Fiberglass
-
Out of stockAn innovative wash that was engineered to be pH neutral, gentle for all finishes, 100% clean rinsing while delivering real cleaning power. With a plus factor this premium wash softens hard wash water and neutralizes acid rain. Biodegradable formula safely and effectively removes dirt and grime without striping waxes or sealants. Leaves a clean high gloss finish. Excellent for use on cars, boats, aircraft and rv’s.
-
Out of stock# 121 Ultimate Cleaner is just that "The Ultimate Cleaner". Properly diluted # 121 is a safe effective pH neutral cleaner for most all surfaces including interior carpets, vinyl, rubber, leather, tires, engine compartments, door jams, aircraft underbelly cleaning etc. Formulated with antibacterial agents it kills the bacteria that creates odor leaving a clean fresh sent. It is also excellent for home. Use to clean counters,tubs, floors, stone, spot clean clothing prior to washing and tuff carpet stains.
-
- A polymer sealant for all finishes. It is a blend of anti-corrosive, detergent-resistant polysiloxane copolymers and high melt resins that provides a high gloss, durable protective film that protects the finish against heat, water, and detergent.
- Removes surface accumulation and oxidation.
- Penetrates and seals giving great depth to true paint colors thus it provides months of maintenance free appearance and protection against environmental elements, oxidation and detergents.
- To protect the finish of your car for a long time, FK recommends the use of # 2180 once a month initially and then once every 2-3 months.
- Not safe to use on Trims.
-
Out of stock
- The ultimate wash adified amides, enhanced by the presence of fatty based amide derivatives.
- Cationic in nature 1016 generates a clear glossy protective film that attaches itself to finish while delivering a noticeable enhanced finish.
- The finish glistens without the use of waxes or oils. Excellent for use on paint, glassnd wax with real high tech polymer protection unlike any other product.
- Engineered from mo, chrome, gel coat, fiberglass and Plexiglas etc.
-
- Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean molds and relieve the problems of wax build-up & over-spray from mold surfaces.
- Important mold release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the molds.
- Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper molds and parts.
- Please note #69 mold cleaner does not relieve Styrene burns.
-
- Can be mopped or wiped on. Reduces clean-up time and increases efficiency in production.
- Eliminates fire hazard by removing the use of paper.
- One gallon of #PB-1 will cover approximately 150-200 square feet on porous surface and up to 400 square feet on smooth non-porous surface.
- Recommend using three applications; Allow each coat to dry prior to applying the next coat – assuring proper coverage.cations; Allow each coat to dry prior to applying the next coat – assuring proper coverage.
-
- Specially designed for use between multiple releases to relieve the wax build up and reduce surface tension in molds.
- Helps to prolong the life of multiple cycle releases.
- Solvents in the product liquefy the mold release waxes to form an even coat on the mold for easy de-molding.
-
- Solvent-based mold cleaner for removing wax.
- Contains toluene and fortified with polymers.
- A much stronger cleaner than #69 that can be used for the clean-up of all types of molds prior to applying porosity sealing agents and mold release agents – wax-based or otherwise.
- Apply at least 2 coats of #135-80 for proper cleaning of molds and assured releases.
-
- A polymer solution designed for efficient "sealing of porosity" in new and rejuvenated molds.
- Aids and assists the wax release agents to assure a clean and easy demolding.
