- Recommended for use to remove finer scratches and compound swirl marks from all types of painted finishes.
-
-
- Formulated for use by hand, to produce a wet look shine on all paint finishes after machine glazing.
- This special blend with high melt Polymers and Resins will provide long lasting gloss and protection.
- Contains no harmful silicones and allows fresh paint to breath and dry properly.
-
- A water based dressing that is Body Shop safe.
- It is made thick for easy applicability using a sponge or a brush.
- Tires will be dark and glossy.
- # 350 will not wash off that easily and thus will last long.
- Some tires, which are very porous or cracked and dry, will require extra coat of dressing because some of the dressing will be absorbed.
-
Out of stockAn innovative wash that was engineered to be pH neutral, gentle for all finishes, 100% clean rinsing while delivering real cleaning power. With a plus factor this premium wash softens hard wash water and neutralizes acid rain. Biodegradable formula safely and effectively removes dirt and grime without striping waxes or sealants. Leaves a clean high gloss finish. Excellent for use on cars, boats, aircraft and rv’s.
-
Out of stock# 121 Ultimate Cleaner is just that "The Ultimate Cleaner". Properly diluted # 121 is a safe effective pH neutral cleaner for most all surfaces including interior carpets, vinyl, rubber, leather, tires, engine compartments, door jams, aircraft underbelly cleaning etc. Formulated with antibacterial agents it kills the bacteria that creates odor leaving a clean fresh sent. It is also excellent for home. Use to clean counters,tubs, floors, stone, spot clean clothing prior to washing and tuff carpet stains.
-
Out of stock
- The ultimate wash adified amides, enhanced by the presence of fatty based amide derivatives.
- Cationic in nature 1016 generates a clear glossy protective film that attaches itself to finish while delivering a noticeable enhanced finish.
- The finish glistens without the use of waxes or oils. Excellent for use on paint, glassnd wax with real high tech polymer protection unlike any other product.
- Engineered from mo, chrome, gel coat, fiberglass and Plexiglas etc.
-
- # 440-5 is a micro abrasive compound formulated for quick cutting power without scouring or tearing up the clear coat, leaving an exceptional high gloss finish.
- For removal of heavy oxidation, scratches and imperfections caused by fallout or other surface impediments.
- It is excellent for Body Shop use.
- Removes sanding marks 1000 grit or finer.
-
- Is a fast cutting compound and can be used by hand or machine.
- It is recommended for rubbing out major and fine mold imperfections, all kinds of scratches, over-spray and removal of foreign matter.
- It is designed for medium to heavy duty work.
-
- Made with a heavy wax base.
- Fine polishing compound used for the final machine polishing and dressing of molds before sealing and waxing.
- Improves clarity and luster.
- Excellent for older parts where light buffing may be required.
-
Out of stock
- A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
- Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
- Can be applied to all painted or gel coat surfaces.
-
Out of stock
- Fast cutting compound that can be applied by hand or machine.
- Recommended for rubbing out fine mold imperfections and fine or minor scratches.
- Removes and blends or does touch up of mold surfaces when removal of foreign matter is essential.
- Can also be used in heavy-duty work.
-
- Specially formulated for removal of wet or dry sanding marks, imperfections and other mild defects without scouring the gel coat.
- A fast cutting compound formulated with fine abrasives and silicates to remove fine to medium scratches and blemishes.
- Can be used on all gel coated surfaces as well as other mold materials.
-
- FK’s premium cleaner that incorporates glazing and spreading agents.
- Cleans deeper without any heavy abrasive action.
- Easily relieves buffer swirls, paint and gel burns; Smoothens and removes fine scratches and blemishes.
- Assures a deeper and cleaner finish on molds for sharp looking parts.
- Recommended for rubbing out slight imperfections in the mold or finished parts and for removal of oxidation and/or discoloration of older parts. It is comparable to Meguire #1 Compound.
-
Out of stock
- Similar in hardness to #1000P. It is yellow in color and has a peculiar, turpentine smell.
- Comparable to Meguiar’s #8. Our extensive testing shows that you get equivalent or better release with #888 than with comparable Meguiar’s product.
- Good for up to 230º F or 120º C.
- This is one of our newer products and sample requests welcome.
-
It is recommended for the following types of urethane moldings:
- Elastomer Urethane
- Polyisocynate Component A
- Hydro-Resin Component B
- Urethane Foam
- Isocynate Component A (Diphenylmethone)
- Poly Component B (Polypreponal Glycol)
-
- Same usage as #135-80, but #80 is milder and contains no toluene or polymers.
- Specially formulated for cleaning Elastomer Resins (ER).
- Contains special surfactants that do not react with the resin that other cleaners might.
-
- Same as #69 but contains anti-static agent which helps to reduce dust and particle attraction to molds due to buildup of static charge.
- Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean molds and relieve the problems of wax build-up & over-spray from mold surfaces.
- Important mold release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the molds.
- Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper molds and parts.
- Please note #69AS does not relieve Styrene burns.
