- # 215 is formulated for high production reconditioning.
- This polymer Cleaner Sealant can be used by hand or machine to remove oxidation, light scratches and blemishes and to restore a paint to a deep gloss with a durable finish.
-
-
- Poly Wipe is a polymer sealant.
- Apply it as a final protective coat over all new or pre-cleaned, different color finishes.
- Easy on and off application.
-
- A polymer sealant for all finishes. It is a blend of anti-corrosive, detergent-resistant polysiloxane copolymers and high melt resins that provides a high gloss, durable protective film that protects the finish against heat, water, and detergent.
- Removes surface accumulation and oxidation.
- Penetrates and seals giving great depth to true paint colors thus it provides months of maintenance free appearance and protection against environmental elements, oxidation and detergents.
- To protect the finish of your car for a long time, FK recommends the use of # 2180 once a month initially and then once every 2-3 months.
- Not safe to use on Trims.
-
- Formulated for use by hand, to produce a wet look shine on all paint finishes after machine glazing.
- This special blend with high melt Polymers and Resins will provide long lasting gloss and protection.
- Contains no harmful silicones and allows fresh paint to breath and dry properly.
-
- Recommended for use to remove finer scratches and compound swirl marks from all types of painted finishes.
-
BWM 114 is a fast cutting compound for all fiberglass, chrome, and paint, buffered for effective cleaning without heavy scratching. It is STEP 1 of 3 in our BIG WHITE PASTE WAX SYSTEM. Apply to all fiberglass, chrome and painted surfaces to remove oxidation, rust or stains. Follow with an application of BWM # 164 Sealant Conditioner for smoothing and color brightening. Then BWM for the ultimate in surface protection, apply BWM # 101 Hi-Temp Paste Wax. DIRECTIONS: Apply compound with soft toweling. Work thoroughly into the surface to be cleaned and waxed. Use circular motion. Overlap previous area for uniformity, wipe off residue with soft cloth or toweling. Turn to clean side. Buff to a bright slick surface. Machine Operation: Power Buff. Dab material with the brush and apply on to the area to be buffed. Spread evenly, maintaining a light even pressure. Continue to buff, overlapping previous area for uniformity. Finish buff to dry lustrous finish.
-
BWM-164 is designed for all fiberglass, chrome & painted surfaces. It brings back dull surfaces to new or near new condition. It is a polish & conditioner in one, so it cleans, protects and restores in one easy step. If there is excessive oxidation, a second application may be necessary. California VOC compliant. DIRECTIONS: It can be applied by hand or machine. For hand use, apply # 164 with a soft towel by working it thoroughly into the surface. Use overlapping circular motion for uniform coverage. Allow it to dry to a haze and wipe off residue with a soft cloth, turn to a clean side of a towel & buff to a glossy smooth surface. When using a buffer maintain a light even pressure and buff in overlapping areas for uniformity. Then, allow it to dry completely and wipe with a clean soft cloth or towel to a glossy surface.
-
FINAL STEP OF 3 STEP BIG WHITE PASTE WAX SYSTEM FK’s # BWM 101 is made from a blend of synthetic waxes to obtain a high degree of consistent quality. The most important attributes of this wax blend are hi melting points and greater hardness than natural waxes. The resulting film provides not only the high gloss but resistance to wear from heat, water & other natural causes. California VOC compliant. It is easy to use and easy to wipe off. It is fantastic for the following Marine, Aircraft & Automotive finishes:
- Clear Coats
- Gel Coats
- Painted Surfaces
- Chrom
- Stainless Steel
- Fiberglass
-
- Contains exclusive Anti-static agents.
- It is a water based resin wax system for removing surface soil while providing a lustrous protected surface.
- A quick finish rejuvenator for all fiberglass and painted surfaces.
- Seals and protects.
-
- Formulated specifically for FRP and cultured marble industries where a flange- or edge-wax is required to assist in the prompt and easy release of the part.
- Edge Wax is a semi-paste and it incorporates synthetic waxes into a system that forms a film that is virtually unbendable when applied as follows.
-
- Synthetic, polymer resin based, low viscosity sealant that can be sprayed or wiped on the prepared mold.
- Highly recommended as a spray base mold release wax for all non-skid areas.
- Apply in the following manner:
- For High Shine: Spray on, allow it to dry and wipe off.
- For Dull Finish: Spray on, allow it to dry, wipe off surplus from only outside surfaces.
- On non-skid area, just apply but do not wipe.
-
- Formulated exclusively for the FRP, cultured marble and onyx manufacturers.
- Semi-viscous paste wax that may be brushed or wiped on.
- White in color so that it will not discolor.
- Also effective in release hats, flanges and back splashes.
-
- Can be mopped or wiped on. Reduces clean-up time and increases efficiency in production.
- Eliminates fire hazard by removing the use of paper.
- One gallon of #PB-1 will cover approximately 150-200 square feet on porous surface and up to 400 square feet on smooth non-porous surface.
- Recommend using three applications; Allow each coat to dry prior to applying the next coat – assuring proper coverage.cations; Allow each coat to dry prior to applying the next coat – assuring proper coverage.
-
- Incorporates a blend of polyethylene resins, polymers and sun screening agents to form a protective barrier against exposure, inclement weather, heat, and ultraviolet solar rays.
- A protective coating without the extreme and difficult problems of removal that most products of this nature represent.
- Recommend use of either pressurized or siphon spray gun as an applicator. When spraying, do not to exceed gun pressure greater than 40 PSI. Adjust fan to desired width over a pre-cleaned surface. Spray one coat; allow it to dry. Cross spray, allow to dry. Spray flow coat to desired thickness for proper coverage.
-
- Formulated for cultured marble, granite and onyx manufacturers.
- Blend of synthetic waxes, polymers and resins for high-heat stability and multiple releases.
- Brush or wipe on three consecutive coats of #626, one coat at a time allowing each coat to dry before reapplying second and third coat to all hats, flanges, corners, edges and areas where a gloss is not required. Do not wipe. This builds a wax surface that will produce multiple releases and should require only periodic application unless area is marred when pulling a part. In this case, reapply #626 Polymer Hat Wax to affected area.
-
- Made with a heavy wax base.
- Fine polishing compound used for the final machine polishing and dressing of molds before sealing and waxing.
- Improves clarity and luster.
- Excellent for older parts where light buffing may be required.
-
- A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
- Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
- Can be applied to all painted or gel coat surfaces.
-
Finish Kare’s 2685 Cherry Pink Paste Wax is a special blend of wax and polymer resins. This delightfully scented, buttery soft wax is easy to apply. It is equally as effortless to wipe off and produces a deep glossy protective film that lasts for 3-6 months. It is safe to use for all Automotive, Marine, Motorcycle and Aircraft finishes.
