- Poly Wipe is a polymer sealant.
- Apply it as a final protective coat over all new or pre-cleaned, different color finishes.
- Easy on and off application.
-
-
- # 215 is formulated for high production reconditioning.
- This polymer Cleaner Sealant can be used by hand or machine to remove oxidation, light scratches and blemishes and to restore a paint to a deep gloss with a durable finish.
-
- A blend of poly resins, synthetic and organic waxes with anti static agent that eliminates static dust cling.
- Brightens and shines while cleaning finger print marks and surface dust.
- Easy to use and sprays well.
- It is recommended to be used at new car dealer show rooms for quick clean and excellent shine.
-
- Contains exclusive Anti-static agents.
- It is a water based resin wax system for removing surface soil while providing a lustrous protected surface.
- A quick finish rejuvenator for all fiberglass and painted surfaces.
- Seals and protects.
-
A polymer-based release agent which has high heat stability. It’s polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions. It is specially designed for:
- Accelerated Exothermic Resins up to 400º F or 204º C
- Multiple Releases
- Compression Molding
- Vacuum Bagging
- Resin Transfer Molding (RTM)
-
It is recommended for the following types of urethane moldings:
- Elastomer Urethane
- Polyisocynate Component A
- Hydro-Resin Component B
- Urethane Foam
- Isocynate Component A (Diphenylmethone)
- Poly Component B (Polypreponal Glycol)
-
Out of stock# 121 Ultimate Cleaner is just that "The Ultimate Cleaner". Properly diluted # 121 is a safe effective pH neutral cleaner for most all surfaces including interior carpets, vinyl, rubber, leather, tires, engine compartments, door jams, aircraft underbelly cleaning etc. Formulated with antibacterial agents it kills the bacteria that creates odor leaving a clean fresh sent. It is also excellent for home. Use to clean counters,tubs, floors, stone, spot clean clothing prior to washing and tuff carpet stains.
-
Out of stockAn innovative wash that was engineered to be pH neutral, gentle for all finishes, 100% clean rinsing while delivering real cleaning power. With a plus factor this premium wash softens hard wash water and neutralizes acid rain. Biodegradable formula safely and effectively removes dirt and grime without striping waxes or sealants. Leaves a clean high gloss finish. Excellent for use on cars, boats, aircraft and rv’s.
-
- As the name implies, designed to withstand higher temperatures and is harder than other waxes.
- Good for up to 275º F or 135º C.
- USAGE: Higher temperature exothermic reactions.
-
- Is a fast cutting compound and can be used by hand or machine.
- It is recommended for rubbing out major and fine mold imperfections, all kinds of scratches, over-spray and removal of foreign matter.
- It is designed for medium to heavy duty work.
-
- A liquid polymer sealant conditioner formulated to condition, restore and protect leather surfaces and all interior/exterior plastic, rubber and vinyl surfaces.
- It leaves a like new finish that is not greasy or wet.
- Excellent for use on leather interiors, dashes, engine compartments, tires, rubber trim and molding.
- #180AS is enriched with an anti-static agent to eliminate dust attraction.
-
- FK’s premium cleaner that incorporates glazing and spreading agents.
- Cleans deeper without any heavy abrasive action.
- Easily relieves buffer swirls, paint and gel burns; Smoothens and removes fine scratches and blemishes.
- Assures a deeper and cleaner finish on molds for sharp looking parts.
- Recommended for rubbing out slight imperfections in the mold or finished parts and for removal of oxidation and/or discoloration of older parts. It is comparable to Meguire #1 Compound.
-
Out of stock
- The ultimate wash adified amides, enhanced by the presence of fatty based amide derivatives.
- Cationic in nature 1016 generates a clear glossy protective film that attaches itself to finish while delivering a noticeable enhanced finish.
- The finish glistens without the use of waxes or oils. Excellent for use on paint, glassnd wax with real high tech polymer protection unlike any other product.
- Engineered from mo, chrome, gel coat, fiberglass and Plexiglas etc.
-
- Specially designed to reduce the slip factor, which under some situations might allude to pre-release.
- In the event “pre-release” occurs on corners, wells and radiuses due to excessive exothermic heat generated by mass chopping over these areas due to repeated passes, apply #1006 as the last coat or last two coats over the application of #1000P prior to gel coat and lay up.
-
- Formulated so as to be brushed over gel coat before the final wax coat is applied without worrying about fish eye.
- Recommended to be applied to any mold surface, whole or partial, where brushing the gel coat on the mold is required.
- Can be used over #1000P as the final coat or used by itself when gel coating.
-
- Contains a blend of synthetic waxes and is one of FK’s premium mold release waxes.
- Proper application of this wax will result in a film that has high gloss and has resistance to intensive wear, heat and water.
- Good for up to 275º F or 135º C.
-
- Heavy-duty (HD) cousin of FK’s #332: Hand or Spray Interphase Release Wax. Contains the same high-melt synthetic blend waxes incorporated into #1000P: Hi-Low Paste Wax and #1000L: Hi-Low Liquid Wax but the solvent systems have been changed to reduce viscosity and make the product sprayable.
- Field tested and fully embraced by all users because it gets the job done – especially for larger molds, panels and other large jobs that require excessive labor for application of paste or liquid waxes.
- Very easy application – just spray on, allow it to dry and then wipe lightly – quick and easy. Cuts your labor costs and increases your productivity.
-
- Specially designed for use between multiple releases to relieve the wax build up and reduce surface tension in molds.
- Helps to prolong the life of multiple cycle releases.
- Solvents in the product liquefy the mold release waxes to form an even coat on the mold for easy de-molding.
