- Specially formulated for removal of wet or dry sanding marks, imperfections and other mild defects without scouring the gel coat.
- A fast cutting compound formulated with fine abrasives and silicates to remove fine to medium scratches and blemishes.
- Can be used on all gel coated surfaces as well as other mold materials.
-
-
- Fast cutting compound that can be applied by hand or machine.
- Recommended for rubbing out fine mold imperfections and fine or minor scratches.
- Removes and blends or does touch up of mold surfaces when removal of foreign matter is essential.
- Can also be used in heavy-duty work.
-
- Formulated exclusively for the FRP, cultured marble and onyx manufacturers.
- Semi-viscous paste wax that may be brushed or wiped on.
- White in color so that it will not discolor.
- Also effective in release hats, flanges and back splashes.
-
- Formulated for cultured marble, granite and onyx manufacturers.
- Blend of synthetic waxes, polymers and resins for high-heat stability and multiple releases.
- Brush or wipe on three consecutive coats of #626, one coat at a time allowing each coat to dry before reapplying second and third coat to all hats, flanges, corners, edges and areas where a gloss is not required. Do not wipe. This builds a wax surface that will produce multiple releases and should require only periodic application unless area is marred when pulling a part. In this case, reapply #626 Polymer Hat Wax to affected area.
-
- Formulated specifically for FRP and cultured marble industries where a flange- or edge-wax is required to assist in the prompt and easy release of the part.
- Edge Wax is a semi-paste and it incorporates synthetic waxes into a system that forms a film that is virtually unbendable when applied as follows.
-
- Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean molds and relieve the problems of wax build-up & over-spray from mold surfaces.
- Important mold release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the molds.
- Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper molds and parts.
- Please note #69 mold cleaner does not relieve Styrene burns.
-
- Same as #69 but contains anti-static agent which helps to reduce dust and particle attraction to molds due to buildup of static charge.
- Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean molds and relieve the problems of wax build-up & over-spray from mold surfaces.
- Important mold release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the molds.
- Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper molds and parts.
- Please note #69AS does not relieve Styrene burns.
-
- Same usage as #135-80, but #80 is milder and contains no toluene or polymers.
- Specially formulated for cleaning Elastomer Resins (ER).
- Contains special surfactants that do not react with the resin that other cleaners might.
-
- Solvent-based mold cleaner for removing wax.
- Contains toluene and fortified with polymers.
- A much stronger cleaner than #69 that can be used for the clean-up of all types of molds prior to applying porosity sealing agents and mold release agents – wax-based or otherwise.
- Apply at least 2 coats of #135-80 for proper cleaning of molds and assured releases.
-
- A polymer solution designed for efficient "sealing of porosity" in new and rejuvenated molds.
- Aids and assists the wax release agents to assure a clean and easy demolding.
-
- Similar in hardness to #1000P. It is yellow in color and has a peculiar, turpentine smell.
- Comparable to Meguiar’s #8. Our extensive testing shows that you get equivalent or better release with #888 than with comparable Meguiar’s product.
- Good for up to 230º F or 120º C.
- This is one of our newer products and sample requests welcome.
-
- A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
- Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
- Can be applied to all painted or gel coat surfaces.
-
- A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
- Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
- Can be applied to all painted or gel coat surfaces.
-
- Can be mopped or wiped on. Reduces clean-up time and increases efficiency in production.
- Eliminates fire hazard by removing the use of paper.
- One gallon of #PB-1 will cover approximately 150-200 square feet on porous surface and up to 400 square feet on smooth non-porous surface.
- Recommend using three applications; Allow each coat to dry prior to applying the next coat – assuring proper coverage.cations; Allow each coat to dry prior to applying the next coat – assuring proper coverage.
-
FINAL STEP OF 3 STEP BIG WHITE PASTE WAX SYSTEM FK’s # BWM 101 is made from a blend of synthetic waxes to obtain a high degree of consistent quality. The most important attributes of this wax blend are hi melting points and greater hardness than natural waxes. The resulting film provides not only the high gloss but resistance to wear from heat, water & other natural causes. California VOC compliant. It is easy to use and easy to wipe off. It is fantastic for the following Marine, Aircraft & Automotive finishes:
- Clear Coats
- Gel Coats
- Painted Surfaces
- Chrom
- Stainless Steel
- Fiberglass
-
BWM 114 is a fast cutting compound for all fiberglass, chrome, and paint, buffered for effective cleaning without heavy scratching. It is STEP 1 of 3 in our BIG WHITE PASTE WAX SYSTEM. Apply to all fiberglass, chrome and painted surfaces to remove oxidation, rust or stains. Follow with an application of BWM # 164 Sealant Conditioner for smoothing and color brightening. Then BWM for the ultimate in surface protection, apply BWM # 101 Hi-Temp Paste Wax. DIRECTIONS: Apply compound with soft toweling. Work thoroughly into the surface to be cleaned and waxed. Use circular motion. Overlap previous area for uniformity, wipe off residue with soft cloth or toweling. Turn to clean side. Buff to a bright slick surface. Machine Operation: Power Buff. Dab material with the brush and apply on to the area to be buffed. Spread evenly, maintaining a light even pressure. Continue to buff, overlapping previous area for uniformity. Finish buff to dry lustrous finish.
-
BWM-164 is designed for all fiberglass, chrome & painted surfaces. It brings back dull surfaces to new or near new condition. It is a polish & conditioner in one, so it cleans, protects and restores in one easy step. If there is excessive oxidation, a second application may be necessary. California VOC compliant. DIRECTIONS: It can be applied by hand or machine. For hand use, apply # 164 with a soft towel by working it thoroughly into the surface. Use overlapping circular motion for uniform coverage. Allow it to dry to a haze and wipe off residue with a soft cloth, turn to a clean side of a towel & buff to a glossy smooth surface. When using a buffer maintain a light even pressure and buff in overlapping areas for uniformity. Then, allow it to dry completely and wipe with a clean soft cloth or towel to a glossy surface.
