Shop

Featured Products

View Cart

Details Quick View

#80: Liquid Mold Cleaner
Same usage as #135-80, but #80 is milder and contains no toluene or polymers.

Specially formulated for cleaning Elastomer Resins (ER).

Contains special surfactants that do not react with the resin that other cleaners might.
View Cart

Details Quick View

#135T: Polymer Release Agent
A polymer-based release agent which has high heat stability. It’s polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions. It is specially designed for:

Accelerated Exothermic Resins up to 400º F or 204º C

Multiple Releases

Compression Molding

Vacuum Bagging

Resin Transfer Molding (RTM)

NOTE: For best results, use terry cloth or Turkish towels when applying #135T. Apply in a circular motion to mold by overlapping previous area. Work product in thoroughly over the mold creating a thin even coat. Check for uniform coverage. Allow it to dry. Reapply as directed. #135T may be sprayed. When applying, if sprayed, we suggest wiping it lightly over sprayed film for uniform coverage.
View Cart

Select options / Details Quick View

#86: Seal Kote

$107.80 – $338.00
A polymer solution designed for efficient "sealing of porosity" in new and rejuvenated molds.

Aids and assists the wax release agents to assure a clean and easy demolding.

Browse all products

View Cart

Details Quick View

#69AS: Anti-Static Mold Cleaner & Stripper
Same as #69 but contains anti-static agent which helps to reduce dust and particle attraction to molds due to buildup of static charge.

Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean molds and relieve the problems of wax build-up & over-spray from mold surfaces.

Important mold release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the molds.

Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper molds and parts.

Please note #69AS does not relieve Styrene burns.
View Cart

Details Quick View

#80: Liquid Mold Cleaner
Same usage as #135-80, but #80 is milder and contains no toluene or polymers.

Specially formulated for cleaning Elastomer Resins (ER).

Contains special surfactants that do not react with the resin that other cleaners might.
View Cart

Details Quick View

#135T: Polymer Release Agent
A polymer-based release agent which has high heat stability. It’s polymers provide multiple releases and protection from high heat generated from accelerated exothermic reactions. It is specially designed for:

Accelerated Exothermic Resins up to 400º F or 204º C

Multiple Releases

Compression Molding

Vacuum Bagging

Resin Transfer Molding (RTM)

NOTE: For best results, use terry cloth or Turkish towels when applying #135T. Apply in a circular motion to mold by overlapping previous area. Work product in thoroughly over the mold creating a thin even coat. Check for uniform coverage. Allow it to dry. Reapply as directed. #135T may be sprayed. When applying, if sprayed, we suggest wiping it lightly over sprayed film for uniform coverage.
View Cart

Details Quick View

#135ER: Polymer Release Agent for Urethane
It is recommended for the following types of urethane moldings:

Elastomer Urethane

Polyisocynate Component A

Hydro-Resin Component B

Urethane Foam

Isocynate Component A (Diphenylmethone)

Poly Component B (Polypreponal Glycol)

Note: For #135 ER, follow the same guidelines as #135T.
View Cart

Details Quick View

#888: Max Mold Release Paste Wax
Similar in hardness to #1000P. It is yellow in color and has a peculiar, turpentine smell.

Comparable to Meguiar’s #8. Our extensive testing shows that you get equivalent or better release with #888 than with comparable Meguiar’s product.

Good for up to 230º F or 120º C.

This is one of our newer products and sample requests welcome.
View Cart

Details Quick View

#1000L-28: Sprayable HD Mold Release Wax
Heavy-duty (HD) cousin of FK’s #332: Hand or Spray Interphase Release Wax. Contains the same high-melt synthetic blend waxes incorporated into #1000P: Hi-Low Paste Wax and #1000L: Hi-Low Liquid Wax but the solvent systems have been changed to reduce viscosity and make the product sprayable.

Field tested and fully embraced by all users because it gets the job done – especially for larger molds, panels and other large jobs that require excessive labor for application of paste or liquid waxes.

Very easy application – just spray on, allow it to dry and then wipe lightly – quick and easy. Cuts your labor costs and increases your productivity.
View Cart

Details Quick View

#103: Extra Heavy Duty Cleaner
FK’s premium cleaner that incorporates glazing and spreading agents.

Cleans deeper without any heavy abrasive action.

Easily relieves buffer swirls, paint and gel burns; Smoothens and removes fine scratches and blemishes.

Assures a deeper and cleaner finish on molds for sharp looking parts.

Recommended for rubbing out slight imperfections in the mold or finished parts and for removal of oxidation and/or discoloration of older parts. It is comparable to Meguire #1 Compound.
View Cart

Details Quick View

#440-5: Polishing Compound
Specially formulated for removal of wet or dry sanding marks, imperfections and other mild defects without scouring the gel coat.

A fast cutting compound formulated with fine abrasives and silicates to remove fine to medium scratches and blemishes.

Can be used on all gel coated surfaces as well as other mold materials.
View Cart

Details Quick View

#600: White Fine Rubbing Compound (Paste)
Fast cutting compound that can be applied by hand or machine.

Recommended for rubbing out fine mold imperfections and fine or minor scratches.

Removes and blends or does touch up of mold surfaces when removal of foreign matter is essential.

Can also be used in heavy-duty work.
View Cart

Details Quick View

#923: Micro Polishing Compound
A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.

Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.

Can be applied to all painted or gel coat surfaces.
View Cart

Details Quick View

#330: Mini Buff
Made with a heavy wax base.

Fine polishing compound used for the final machine polishing and dressing of molds before sealing and waxing.

Improves clarity and luster.

Excellent for older parts where light buffing may be required.
View Cart

Details Quick View

#115L-4: Heavy Duty Liquid Compound
Is a fast cutting compound and can be used by hand or machine.

It is recommended for rubbing out major and fine mold imperfections, all kinds of scratches, over-spray and removal of foreign matter.

It is designed for medium to heavy duty work.

DIRECTIONS: To remove oxidation and light surface scratches use a rotary buffer with yellow foam pad or for heavier scratches and oxidation use a white wool pad. Set buffer speed at about 1500 rpm. Apply enough 115L-4 to buff a 2’x2’ section. Apply light even pressure in overlapping manner as you buff. DO NOT OVERHEAT. Wipe away any splatter with a soft clean towel then continue onto next section. After oxidation and blemishes have been removed, inspect the area for swirls. If you see swirls, switch to a black finishing foam pad and lower buffing speed to 1000rpm. Apply light even pressure & keep pad flat to surface whenever possible doing a 2’x2’ section at a time. Continue in this manner until all swirls are eliminated.

Title