• Is a fast cutting compound and can be used by hand or machine.
  • It is recommended for rubbing out major and fine mold imperfections, all kinds of scratches, over-spray and removal of foreign matter.
  • It is designed for medium to heavy duty work.

DIRECTIONS: To remove oxidation and light surface scratches use a rotary buffer with yellow foam pad or for heavier scratches and oxidation use a white wool pad. Set buffer speed at about 1500 rpm. Apply enough 115L-4 to buff a 2’x2’ section. Apply light even pressure in overlapping manner as you buff. DO NOT OVERHEAT. Wipe away any splatter with a soft clean towel then continue onto next section.

After oxidation and blemishes have been removed, inspect the area for swirls. If you see swirls, switch to a black finishing foam pad and lower buffing speed to 1000rpm. Apply light even pressure & keep pad flat to surface whenever possible doing a 2’x2’ section at a time. Continue in this manner until all swirls are eliminated.