Waxes & Paint Sealants Archives

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

#215: One Step Cleaner Sealant

$14.30
# 215 is formulated for high production reconditioning.

This polymer Cleaner Sealant can be used by hand or machine to remove oxidation, light scratches and blemishes and to restore a paint to a deep gloss with a durable finish.

DIRECTIONS: For hand application apply it in a circular motion with a soft applicator pad and overlap the areas. Work it in thoroughly and create a thin even film on the surface. Allow to haze and then wipe off with a soft micro fiber towel to a rich deep gloss. To remove oxidation and light surface scratches use a buffer with a yellow foam pad. For heavier scratches and oxidation use white cutting wool pad. Buffer speed should be about 1500 rpm initially then reduce it to about 1000 rpm and use black finishing pad to remove finer scratches and swirl marks to get a deep gloss.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

#218: Poly Wipe Sealant Conditioner

$16.20
Poly Wipe is a polymer sealant.

Apply it as a final protective coat over all new or pre-cleaned, different color finishes.

Easy on and off application.

DIRECTIONS: Shake well. Do not apply in direct sun or on hot surfaces. Apply to clean surfaces only. For best results, apply using a soft towel or an orbital buffer with a soft terry cloth bonnet working the material well into the finish. Allow the product to dry completely, normally about 15 minutes. Remove it with a soft, dry towel. Poly Wipe may be applied to any OEM Paint system and it is compatible with all new Poly Urethane and Urethane systems. Please allow 24 hours cure time of the paint system before applying Poly Wipe. Note: The product should not be applied to old style enamels and lacquers until all the solvents have evaporated, normally in 30 to 45 days.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

#2180: Ultra Polymer Sealant

$30.00 – $98.00
A polymer sealant for all finishes. It is a blend of anti-corrosive, detergent-resistant polysiloxane copolymers and high melt resins that provides a high gloss, durable protective film that protects the finish against heat, water, and detergent.

Removes surface accumulation and oxidation.

Penetrates and seals giving great depth to true paint colors thus it provides months of maintenance free appearance and protection against environmental elements, oxidation and detergents.

To protect the finish of your car for a long time, FK recommends the use of # 2180 once a month initially and then once every 2-3 months.

Not safe to use on Trims.

DIRECTIONS: Do not apply in direct sun or on hot surfaces. Use soft towel or microfiber cloth for application and wiping. Apply the product and work it well into the finish. Allow it to dry, then wipe to brilliant & long-lasting luster. In case of excessive dirt or grit, wash the surface with mild soap before applying.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

#2685: Cherry Pink Paste Wax

$18.75 – $197.16

Finish Kare’s 2685 Cherry Pink Paste Wax is a special blend of wax and polymer resins. This delightfully scented, buttery soft wax is easy to apply. It is equally as effortless to wipe off and produces a deep glossy protective film that lasts for 3-6 months. It is safe to use for all Automotive, Marine, Motorcycle and Aircraft finishes.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

#300: Hand Glaze

$15.60
Formulated for use by hand, to produce a wet look shine on all paint finishes after machine glazing.

This special blend with high melt Polymers and Resins will provide long lasting gloss and protection.

Contains no harmful silicones and allows fresh paint to breath and dry properly.

DIRECTIONS: Shake well and do not apply in direct sunlight or extremely hot surfaces. Apply a small amount onto a soft clean applicator. Work well into surface using light even pressure. Apply evenly to entire panel, then with a clean soft Finish Kare micro fiber towel, wipe product to a high luster.
View Cart

Details Quick View

#303: Foam Pad Glaze
Recommended for use to remove finer scratches and compound swirl marks from all types of painted finishes.

DIRECTIONS: Shake well and do not apply in direct sun or on extremely hot surfaces. On area to be buffed make thin stripe of #303 approximately 6 inches apart then spread the product evenly with light even pressure. Buff at about 1500 rpm. Then reduce the speed to about 1000 rpm and buff the surface to a high gloss. Check for clarity, swirls & scratches. If surface is clear, repeat the process on next section. Overlap area for continuity.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

BWM 101: Hi-Temp Paste Wax

$21.30 – $205.32
FINAL STEP OF 3 STEP BIG WHITE PASTE WAX SYSTEM FK’s # BWM 101 is made from a blend of synthetic waxes to obtain a high degree of consistent quality. The most important attributes of this wax blend are hi melting points and greater hardness than natural waxes. The resulting film provides not only the high gloss but resistance to wear from heat, water & other natural causes. California VOC compliant. It is easy to use and easy to wipe off. It is fantastic for the following Marine, Aircraft & Automotive finishes:

Clear Coats

Gel Coats

Painted Surfaces

Chrom

Stainless Steel

Fiberglass

* Not suited for Plastic trim DIRECTIONS: Apply BWM 101 with a clean & soft cloth onto an already clean surface in an overlapping circular pattern for a uniform film. Allow to dry and wipe off residue with a soft cloth. Then buff to a bright, hard, slick and protective finish. *** BWM 101 used to be known as BWM-1000P, but due to the confusion with our 1000P Mold Release product, the name was changed.