Car Care

  • Out of stock
    • The ultimate wash adified amides, enhanced by the presence of fatty based amide derivatives.
    • Cationic in nature 1016 generates a clear glossy protective film that attaches itself to finish while delivering a noticeable enhanced finish.
    • The finish glistens without the use of waxes or oils. Excellent for use on paint, glassnd wax with real high tech polymer protection unlike any other product.
    • Engineered from mo, chrome, gel coat, fiberglass and Plexiglas etc.
  • 108-Top-Kote-Tire-Dressing-Gallon-Finish-Kare-Car-Care
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • A liquid polymer sealant conditioner formulated to condition, restore and protect leather surfaces and all interior/exterior plastic, rubber and vinyl surfaces.
    • It leaves a like new finish that is not greasy or wet.
    • Excellent for use on leather interiors, dashes, engine compartments, tires, rubber trim and molding.
    • #180AS is enriched with an anti-static agent to eliminate dust attraction.
    DIRECTIONS: Use as is. Do not apply on suede. Spray or wipe on using 100% terry cloth towel or soft applicator pad. Allow it to dry, wipe surplus material slightly.
  • Out of stock
    # 121 Ultimate Cleaner is just that "The Ultimate Cleaner". Properly diluted # 121 is a safe effective pH neutral cleaner for most all surfaces including interior carpets, vinyl, rubber, leather, tires, engine compartments, door jams, aircraft underbelly cleaning etc. Formulated with antibacterial agents it kills the bacteria that creates odor leaving a clean fresh sent. It is also excellent for home. Use to clean counters,tubs, floors, stone, spot clean clothing prior to washing and tuff carpet stains.
  • Anti-Static Finish Restorer
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • A blend of poly resins, synthetic and organic waxes with anti static agent that eliminates static dust cling.
    • Brightens and shines while cleaning finger print marks and surface dust.
    • Easy to use and sprays well.
    • It is recommended to be used at new car dealer show rooms for quick clean and excellent shine.
    DIRECTION: Shake Well. Use as is. Do not apply in direct sun or on hot surfaces. Wipe or mist on with a sprayer & spread using a damp cloth evenly over the surface. Do one section at a time. Do not allow it to dry. Wipe with soft absorbent cloth. Re-Wipe with a dry, soft cloth to get a clear bright luster. Use of micro fiber for spreading & wiping is highly recommended.
  • 215-One-Step-Cleaner-Quart-Finish-Kare-Car-Care
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • # 215 is formulated for high production reconditioning.
    • This polymer Cleaner Sealant can be used by hand or machine to remove oxidation, light scratches and blemishes and to restore a paint to a deep gloss with a durable finish.
    DIRECTIONS: For hand application apply it in a circular motion with a soft applicator pad and overlap the areas. Work it in thoroughly and create a thin even film on the surface. Allow to haze and then wipe off with a soft micro fiber towel to a rich deep gloss. To remove oxidation and light surface scratches use a buffer with a yellow foam pad. For heavier scratches and oxidation use white cutting wool pad. Buffer speed should be about 1500 rpm initially then reduce it to about 1000 rpm and use black finishing pad to remove finer scratches and swirl marks to get a deep gloss.
  • 218-Poly-Wipe-Sealant-Conditioner-Quart-Finish-Kare-Car-Care
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • Poly Wipe is a polymer sealant.
    • Apply it as a final protective coat over all new or pre-cleaned, different color finishes.
    • Easy on and off application.
    DIRECTIONS: Shake well. Do not apply in direct sun or on hot surfaces. Apply to clean surfaces only. For best results, apply using a soft towel or an orbital buffer with a soft terry cloth bonnet working the material well into the finish. Allow the product to dry completely, normally about 15 minutes. Remove it with a soft, dry towel. Poly Wipe may be applied to any OEM Paint system and it is compatible with all new Poly Urethane and Urethane systems. Please allow 24 hours cure time of the paint system before applying Poly Wipe. Note: The product should not be applied to old style enamels and lacquers until all the solvents have evaporated, normally in 30 to 45 days.
  • Ultra Polymer Sealant
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • A polymer sealant for all finishes. It is a blend of anti-corrosive, detergent-resistant polysiloxane copolymers and high melt resins that provides a high gloss, durable protective film that protects the finish against heat, water, and detergent.
    • Removes surface accumulation and oxidation.
    • Penetrates and seals giving great depth to true paint colors thus it provides months of maintenance free appearance and protection against environmental elements, oxidation and detergents.
    • To protect the finish of your car for a long time, FK recommends the use of # 2180 once a month initially and then once every 2-3 months.
    • Not safe to use on Trims.
    DIRECTIONS: Do not apply in direct sun or on hot surfaces. Use soft towel or microfiber cloth for application and wiping. Apply the product and work it well into the finish. Allow it to dry, then wipe to brilliant & long-lasting luster. In case of excessive dirt or grit, wash the surface with mild soap before applying.
  • 2685 Cherry Pink Paste Wax
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    Finish Kare’s 2685 Cherry Pink Paste Wax is a special blend of wax and polymer resins. This delightfully scented, buttery soft wax is easy to apply. It is equally as effortless to wipe off and produces a deep glossy protective film that lasts for 3-6 months. It is safe to use for all Automotive, Marine, Motorcycle and Aircraft finishes.
  • 300 Hand Glaze
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • Formulated for use by hand, to produce a wet look shine on all paint finishes after machine glazing.
    • This special blend with high melt Polymers and Resins will provide long lasting gloss and protection.
    • Contains no harmful silicones and allows fresh paint to breath and dry properly.
    DIRECTIONS: Shake well and do not apply in direct sunlight or extremely hot surfaces. Apply a small amount onto a soft clean applicator. Work well into surface using light even pressure. Apply evenly to entire panel, then with a clean soft Finish Kare micro fiber towel, wipe product to a high luster.
    • Recommended for use to remove finer scratches and compound swirl marks from all types of painted finishes.
    DIRECTIONS: Shake well and do not apply in direct sun or on extremely hot surfaces. On area to be buffed make thin stripe of #303 approximately 6 inches apart then spread the product evenly with light even pressure. Buff at about 1500 rpm. Then reduce the speed to about 1000 rpm and buff the surface to a high gloss. Check for clarity, swirls & scratches.  If surface is clear, repeat the process on next section. Overlap area for continuity.
    • Made with a heavy wax base.
    • Fine polishing compound used for the final machine polishing and dressing of molds before sealing and waxing.
    • Improves clarity and luster.
    • Excellent for older parts where light buffing may be required.
    • A water based dressing that is Body Shop safe.
    • It is made thick for easy applicability using a sponge or a brush.
    • Tires will be dark and glossy.
    • # 350 will not wash off that easily and thus will last long.
    • Some tires, which are very porous or cracked and dry, will require extra coat of dressing because some of the dressing will be absorbed.
    DIRECTIONS: Shake Well. For best results use it as is on a clean dry surface. We recommend to use sponge for easy applicability. Allow it to dry for about 10 minutes and then wipe lightly. To avoid sling-off please wipe the excess.
  • 425 Extra Slick Final Body Shine
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View
    • Cleans and waxes metal, glass and painted surfaces.
    • Removes dust and finger prints.
    • Leaves a bright, glossy shine.
    • Eliminates the need for constant washing.
    • Body Shop Safe.
    • Safe as a clay lubricant.
    • CA VOC Compliant
    • Recommended for Exterior Use
    DIRECTIONS: Use as is. Simply spray Finish Kare’s Final Body Shine on a dusty, smudged or fingerprinted surface. Then wipe with a clean microfiber towel to get a deep protective shine. It is that easy. * Safe to use on Plastic & Rubber Trim
    • # 440-5 is a micro abrasive compound formulated for quick cutting power without scouring or tearing up the clear coat, leaving an exceptional high gloss finish.
    • For removal of heavy oxidation, scratches and imperfections caused by fallout or other surface impediments.
    • It is excellent for Body Shop use.
    • Removes sanding marks 1000 grit or finer.
    DIRECTIONS: Shake well. Do not apply in direct sunlight or ectremely hot surfaces. Using a wool cutting pad, set buffer at 1800-2000 rpm. Apply enough product to create a buffing film that will act as a lubricant between the pad and the painted surface. DO NOT DRY BUFF. Begin buffing using a medium pressure at first them lighten up, overlapping and spreading product evenly over a controlled section. NOTE: For best results, maintain a wet buffing film, avoid dry buffing and tilting pad on edge.
  • Out of stock
    • Fast cutting compound that can be applied by hand or machine.
    • Recommended for rubbing out fine mold imperfections and fine or minor scratches.
    • Removes and blends or does touch up of mold surfaces when removal of foreign matter is essential.
    • Can also be used in heavy-duty work.
  • Out of stock
    • A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
    • Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
    • Can be applied to all painted or gel coat surfaces.
  • Out of stock
    An innovative wash that was engineered to be pH neutral, gentle for all finishes, 100% clean rinsing while delivering real cleaning power. With a plus factor this premium wash softens hard wash water and neutralizes acid rain. Biodegradable formula safely and effectively removes dirt and grime without striping waxes or sealants. Leaves a clean high gloss finish. Excellent for use on cars, boats, aircraft and rv’s.
  • Out of stock

    817: Sparkle Plenty

    $23.00$90.00
    A strong de-limonene based degreaser.
  • BWM 101 Hi Temp Paste Wax
    Select options This product has multiple variants. The options may be chosen on the product page / Details Quick View

    BWM 101: Hi-Temp Paste Wax

    $21.30$205.32
    FINAL STEP OF 3 STEP BIG WHITE PASTE WAX SYSTEM FK’s # BWM 101 is made from a blend of synthetic waxes to obtain a high degree of consistent quality. The most important attributes of this wax blend are hi melting points and greater hardness than natural waxes. The resulting film provides not only the high gloss but resistance to wear from heat, water & other natural causes. California VOC compliant. It is easy to use and easy to wipe off. It is fantastic for the following Marine, Aircraft & Automotive finishes:
    • Clear Coats
    • Gel Coats
    • Painted Surfaces
    • Chrom
    • Stainless Steel
    • Fiberglass
    * Not suited for Plastic trim DIRECTIONS: Apply BWM 101 with a clean & soft cloth onto an already clean surface in an overlapping circular pattern for a uniform film. Allow to dry and wipe off residue with a soft cloth. Then buff to a bright, hard, slick and protective finish.  *** BWM 101 used to be known as BWM-1000P, but due to the confusion with our 1000P Mold Release product, the name was changed.
Go to Top