- Clear Coats
- Gel Coats
- Painted Surfaces
- Chrom
- Stainless Steel
- Fiberglass
-
FINAL STEP OF 3 STEP BIG WHITE PASTE WAX SYSTEM FK’s # BWM 101 is made from a blend of synthetic waxes to obtain a high degree of consistent quality. The most important attributes of this wax blend are hi melting points and greater hardness than natural waxes. The resulting film provides not only the high gloss but resistance to wear from heat, water & other natural causes. California VOC compliant. It is easy to use and easy to wipe off. It is fantastic for the following Marine, Aircraft & Automotive finishes:
-
- A fine micro compound formulated to remove sandpaper marks and imperfections quickly and easily while leaving a high gloss and minimizing swirl problems.
- Easily removes 1500 grit sand marks with a 100% wool cutting pad and 2000 or finer grit with an aggressive foam pad.
- Can be applied to all painted or gel coat surfaces.
-
- Fast cutting compound that can be applied by hand or machine.
- Recommended for rubbing out fine mold imperfections and fine or minor scratches.
- Removes and blends or does touch up of mold surfaces when removal of foreign matter is essential.
- Can also be used in heavy-duty work.
-
- # 440-5 is a micro abrasive compound formulated for quick cutting power without scouring or tearing up the clear coat, leaving an exceptional high gloss finish.
- For removal of heavy oxidation, scratches and imperfections caused by fallout or other surface impediments.
- It is excellent for Body Shop use.
- Removes sanding marks 1000 grit or finer.
-
- Cleans and waxes metal, glass and painted surfaces.
- Removes dust and finger prints.
- Leaves a bright, glossy shine.
- Eliminates the need for constant washing.
- Body Shop Safe.
- Safe as a clay lubricant.
- CA VOC Compliant
- Recommended for Exterior Use
-
- A water based dressing that is Body Shop safe.
- It is made thick for easy applicability using a sponge or a brush.
- Tires will be dark and glossy.
- # 350 will not wash off that easily and thus will last long.
- Some tires, which are very porous or cracked and dry, will require extra coat of dressing because some of the dressing will be absorbed.
-
- Made with a heavy wax base.
- Fine polishing compound used for the final machine polishing and dressing of molds before sealing and waxing.
- Improves clarity and luster.
- Excellent for older parts where light buffing may be required.
-
- Recommended for use to remove finer scratches and compound swirl marks from all types of painted finishes.
-
Finish Kare’s 2685 Cherry Pink Paste Wax is a special blend of wax and polymer resins. This delightfully scented, buttery soft wax is easy to apply. It is equally as effortless to wipe off and produces a deep glossy protective film that lasts for 3-6 months. It is safe to use for all Automotive, Marine, Motorcycle and Aircraft finishes.
-
- Formulated for use by hand, to produce a wet look shine on all paint finishes after machine glazing.
- This special blend with high melt Polymers and Resins will provide long lasting gloss and protection.
- Contains no harmful silicones and allows fresh paint to breath and dry properly.
-
- A polymer sealant for all finishes. It is a blend of anti-corrosive, detergent-resistant polysiloxane copolymers and high melt resins that provides a high gloss, durable protective film that protects the finish against heat, water, and detergent.
- Removes surface accumulation and oxidation.
- Penetrates and seals giving great depth to true paint colors thus it provides months of maintenance free appearance and protection against environmental elements, oxidation and detergents.
- To protect the finish of your car for a long time, FK recommends the use of # 2180 once a month initially and then once every 2-3 months.
- Not safe to use on Trims.
